Profiles

Panel Evaluates Pavement-Vehicle Interaction (PVI) for Improved Pavement Sustainability—Includes VIDEO

Click to go to CSHub MIT VIDEO “What is Pavement Vehicle Interaction?” … Dr. Mehdi Akbarian, Postdoctoral Researcher-MIT CSHub explains PVI and some of CSHub‘s recent case studies: https://www.youtube.com/watch?v=7Z9ldFv5hUw A […]

Panel Evaluates Pavement-Vehicle Interaction (PVI) for Improved Pavement Sustainability—Includes VIDEO Read More »

MIT’s CSHub: Concrete as a Sustainability Solution to Economic, Environmental, & Social Issues

Dr. Jeremy Gregory, Executive Director-Massachusettes Institute of Technology (MIT) Concrete Sustainability Hub (CSHub), presented information on “Concrete as a Sustainability Solution” to the Select Committee on the Climate Crisis in early August in

MIT’s CSHub: Concrete as a Sustainability Solution to Economic, Environmental, & Social Issues Read More »

Concrete Paving Tool Kit a Library of Resources, Now Provides Content to Promote & Install Concrete Parking Lots

The American Society of Concrete Contractors (ASCC) and the National Ready Mixed Concrete Association (NRMCA) joint paving committee has assembled a Paving Tool Kit—a library of resources for concrete paving contractors

Concrete Paving Tool Kit a Library of Resources, Now Provides Content to Promote & Install Concrete Parking Lots Read More »

The Transtec Group Provides Texas Pavement Design—Built to Outlast Design Life—for Longest Highway Loop in U.S.

The Transtec Group—Austin, Texas-based Pavement Engineering Firm—is developing the pavement design for segment H of SH 99 Grand Parkway of Greater Houston Area, Texas, USA. Primarily using concrete, the complete highway loop

The Transtec Group Provides Texas Pavement Design—Built to Outlast Design Life—for Longest Highway Loop in U.S. Read More »

Automated Machine Guidance (AMG)—3D Milling Special Provision

In July 2019, National Road Research Alliance (NRRA) had a link to a special provision for the Automated Machine Guidance (AMG)—Milling Method written by Rebecca Embacher, Advanced Materials Technology Engineer-Minnesota DOT

Automated Machine Guidance (AMG)—3D Milling Special Provision Read More »

What Every Concrete Professional Should Know About PEM

The weather in Minnesota contrasts sharply with that in Florida, which again differs markedly from that in southern Texas. This is not only in terms of temperature variation from summer

What Every Concrete Professional Should Know About PEM Read More »

CP Tech Center Talking Concrete Pavements from Coast to Coast & Beyond …

JUNE was another busy travel month for the National Concrete Pavement Technology Center (CP Tech Center)—the national hub for concrete pavement research and technology transfer founded in 2000, and has

CP Tech Center Talking Concrete Pavements from Coast to Coast & Beyond … Read More »

Michael Ayers Named Executive Director of Illinois Chapter-ACPA

Michael E. Ayers, Ph.D., has been named the Executive Director of the Illinois Chapter—American Concrete Pavement Association (ACPA). Ayers is a veteran concrete pavement engineer who brings vast and in-depth experience

Michael Ayers Named Executive Director of Illinois Chapter-ACPA Read More »

EUPAVE’s “4th Workshop on Best Practices”: Impressive Testimonials on RCC in Turkey, USA, Belgium, Spain, U.K., Europe

The European Concrete Pavement Association (EUPAVE) held its 4th Workshop on Best Practices in Concrete Paving on June 18, 2019 at the Thon Hotel EU in Brussels, Belgium. The theme for

EUPAVE’s “4th Workshop on Best Practices”: Impressive Testimonials on RCC in Turkey, USA, Belgium, Spain, U.K., Europe Read More »

Team Effort Leads to Set Standards in Airport Pavement Specifications—Benefitting Airports, Owners’ Reps, & Taxpaying Public!

A joint effort led to the inclusion of full-depth reclamation (FDR)* in the Federal Aviation Association (FAA)’s FAA Advisory Circular 150/5370-10H (previously: Standard Specifications for Construction of Airports). “The net result of

Team Effort Leads to Set Standards in Airport Pavement Specifications—Benefitting Airports, Owners’ Reps, & Taxpaying Public! Read More »

Hyderabad, India: MoS Addressed Engineers—’Concrete Pavements Best Suited for India’ During “National Conference on Concrete Pavements & Bridges”

As the Guest of Honor, Mr. G. Kishan Reddy, Union Minister of State (MoS) for Home Affairs, addressed the National Conference on “Technological Advances in Concrete Pavements & Bridges” that

Hyderabad, India: MoS Addressed Engineers—’Concrete Pavements Best Suited for India’ During “National Conference on Concrete Pavements & Bridges” Read More »

“Maturity Method” for In-Place Concrete Strength: What Is It, How Is It Measured, & Why Validate It?

The Maturity Method: What is the maturity method? How is maturity measured? Why you should validate your Maturity Curve . . . Maturity has been used for over 50 years.

“Maturity Method” for In-Place Concrete Strength: What Is It, How Is It Measured, & Why Validate It? Read More »

SESPA “2019 Southeast States Pavement Conference” to be Held Oct. 9-11 in Louisville, Ky.

The Southeastern States Pavement Association (SESPA) 2019 Southeast States Pavement Conference will be held October 9-11 at the The Brown Hotel in downtown Louisville, Kentucky, USA, with registration opening October 8

SESPA “2019 Southeast States Pavement Conference” to be Held Oct. 9-11 in Louisville, Ky. Read More »

“Ten-Minute Pulse” Offers a 10-Year Outlook to ‘VISION2040’

Reflecting on “VISION2040“ initiative, David Howard, Strategic Advisory Committee Chairman and 2nd Vice Chairman of the Board-ACPA, led a discussion in June to draw on the experience and expertise of the committee

“Ten-Minute Pulse” Offers a 10-Year Outlook to ‘VISION2040’ Read More »

MIRA Ultrasonic Tomography: A Versatile Tool for Concrete Investigation

There has been a lot of discussion about non-destructive tools for examining asphalt pavement—the Dielectric Profiling System being one of them—but what do we have for concrete? The Ultrasonic Shear-wave

MIRA Ultrasonic Tomography: A Versatile Tool for Concrete Investigation Read More »

Invitation to EUPAVE/FEBELCEM Joint Workshop: Two-layer Concrete Pavements During “MATEXPO2019” on Sept 12!

              The Federation of the Belgian Cement Industry (FEBELCEM), and the European Concrete Paving Association (EUPAVE) extend an invitation to their joint Workshop on Two-layer Concrete

Invitation to EUPAVE/FEBELCEM Joint Workshop: Two-layer Concrete Pavements During “MATEXPO2019” on Sept 12! Read More »

Australia Stages World’s First-Ever ‘Green Concrete Road’ Trial Through Industrial Waste—Step Change in Industry

Sydney, Australia’s most populous city, is conducting the world’s first-ever ‘green’ concrete trial to construct roads using reprocessed industrial waste from coal-fired power stations and steel manufacturing—an initiative that can

Australia Stages World’s First-Ever ‘Green Concrete Road’ Trial Through Industrial Waste—Step Change in Industry Read More »

18th Annual Lecture: “Alaskan Way Viaduct Replacement— Design & Construction of the SR 99 Tunnel” to be Held Sep 23, 2019 in Raleigh, North Carolina, USA (View VIDEO)

SAVE THE DATE! 18th Annual Paul Zia Distinguished Lecture: “Alaskan Way Viaduct Replacement— Design & Construction of the SR 99 Tunnel” Monday   |   September 23, 2019   |

18th Annual Lecture: “Alaskan Way Viaduct Replacement— Design & Construction of the SR 99 Tunnel” to be Held Sep 23, 2019 in Raleigh, North Carolina, USA (View VIDEO) Read More »

VIDEO: Testing Joint Seals at MnROAD

For the ISCP June 2019 article titled “Joint Activation Case Study: Fiber-Reinforced Concrete & Joint Sealant Testing”, please go to: https://www.concretepavements.org/2019/06/28/joint-activation-case-study-fiber-reinforced-concrete-joint-sealant-testing/ (or click on the adjacent article on the ISCP home

VIDEO: Testing Joint Seals at MnROAD Read More »

Joint Activation Case Study: Fiber-Reinforced Concrete & Joint Sealant Testing

As the Minnesota Department of Transportation (MnDOT) continues to pursue building thinner concrete pavements, the design and performance of the pavement can change: One such feature is sawing the concrete

Joint Activation Case Study: Fiber-Reinforced Concrete & Joint Sealant Testing Read More »

Scroll to Top